
ServicesEntry Doors
Entry Doors in Cedar Hill
We replace worn, drafty or dated front doors with new fiberglass, steel or wood units, set square in a fresh frame and sealed against the weather. Your floors stay covered while we work, the old door leaves with us, and the entry is swept clean before we go.
A front door that shuts tight and looks right
No part of the outside of your home gets more daily use than the entry door, and over time it wears. Weatherstripping goes flat, the base of the frame soaks up water and the sun-facing side loses its color. When both the door and its frame are tired, swapping the whole unit brings back a tight seal, a dependable lock and a finish that holds up to a close look.
The doors we install come prehung, meaning the slab is already mounted in its own frame. We can then set the full assembly level and plumb rather than squeezing a new slab into an old jamb that has gone out of square. With over 10 years of experience hanging doors this way, our team pays attention to the details: even spacing around the slab, a threshold that seals but does not drag, and trim corners that meet cleanly.
Your home's interior counts as part of the work too. We put down drop cloths before removing the old door and clean the area before heading out.

What your entry door installation includes
- 01
A new prehung door and frame
Fiberglass, steel or wood, single or double, with or without sidelites or a transom. We help you compare how each material handles heat, dents and refinishing over the years.
- 02
Sill pan and flashing
A sloped pan under the threshold and flashing at the sides send water back outside. Most rotted door bottoms we remove failed for lack of exactly this detail.
- 03
Weatherstripping and threshold set
Compression seals and an adjustable sill are set so the door latches with a light push and still blocks drafts and daylight.
- 04
Locks and hardware
We bore and install your handleset and deadbolt, align the strike plates and fasten the hinges into the framing for a solid, secure close.
- 05
Trim, caulk and finish
New interior casing and exterior trim are fitted, gaps are insulated with low-expansion foam and the perimeter is caulked neatly so the opening looks finished from both sides.
- 06
Protection and cleanup
Floors and nearby furniture are covered, dust is kept to the entry, and the old door, frame and packaging are hauled away the same day.
Questions about Entry Doors?
Call(972) 842-1952How to tell your entry door needs replacing
Gaps you can see or feel
Daylight at the corners or a breeze on a gusty day tells you the seals and frame have pulled apart. Your heating and cooling system is paying for it.
Sticking or failing to latch
The clay soil around Cedar Hill swells and shrinks with the seasons, which can pull an older frame out of square. Once planing and adjustments stop working, a new, level frame is the fix that lasts.
Rot at the base of the jamb
Dark marks, flaking paint or wood that dents under a thumb near the bottom of the frame show water has been getting in. That damage tends to creep behind the trim.
A worn or damaged surface
Rust on steel, cracked wood panels and paint bleached by the sun make the front of your house look older than it really is.
Locks that feel weak
A wobbly deadbolt or a frame that gives when the door is pushed deserves attention. A new door with reinforced strike plates fixes that weak spot.
How the work goes
- 1
Free in-person consultation
We come out, measure the rough opening, check the frame and subfloor at the threshold and talk through materials, glass and hardware. You get a written quote that lists what is included.
- 2
Ordering your door
Once you choose a style and finish, we order the door to the measured size. We confirm the install date with you by phone when it arrives.
- 3
Installation day
We lay floor protection, remove the old door and frame, and inspect the opening. The new unit is flashed, set plumb and level, fastened, insulated and trimmed, and the hardware is installed and adjusted.
- 4
Walkthrough and cleanup
We open and lock the door with you, show you how the threshold adjusts and vacuum the entry. The old materials leave in our truck, so nothing is left in your driveway or yard.
What drives the price of an entry door
From the curb, two front doors may look nearly the same and still carry very different prices. The material, the glass and the shape the opening is in after the old frame comes out account for most of that difference. We list each of these on its own line in your written quote so you can follow the cost. For help with timing, ask about $0 Down on the whole project and our 0% Financing options.
- Material and design
- Plain steel tends to be the most straightforward option. Fiberglass with a wood-grain face and solid wood run higher, offering a warmer look and their own long-term care needs.
- Decorative glass and side panels
- Ornamental glass, blinds between the panes, sidelites and transoms all add to what the unit costs and to the hours needed to set it.
- State of the opening
- Now and then the framing or subfloor under the old threshold has rotted and has to be rebuilt. If we find that, we pause, show you what we found and only add the repair to the quote once you say yes.
- Size and layout
- Double doors, taller units and openings that aren't a standard size need special-order doors and more installation time than a regular single door.
- Hardware and finish choices
- Upgraded handlesets, smart locks and paint or stain applied at the factory all raise the total, though a factory finish saves you from painting down the road.
Answers about entry doors
How much time does a front door replacement take?
A single entry door is usually done in one working day, and the opening is closed up long before dark. Double doors, or a frame with rotted wood underneath, can stretch the job. You hear the expected timing from us when we confirm your date.
Is fiberglass or steel the better pick?
Fiberglass shrugs off dents, never rusts and can wear a realistic wood-grain look. Steel is sturdy and costs less, but it dents and may rust where the paint gets scratched. On a door that sits in hard afternoon sun, fiberglass tends to keep its finish longer.
Does putting in a new door leave a mess in the house?
Floor coverings go down inside and outside the doorway before the old door is touched. Dust and scraps stay inside that zone, and once the new door is hung we sweep and vacuum. We take the old door and frame away with us.
How is a new entry door warrantied?
A limited lifetime warranty covers both labor and product on your door, and it passes to the next owner if the house is sold. We review the terms with you during the walkthrough.
Who pays if something is damaged while you work?
We carry full insurance, so your house and our installers are protected during the replacement. Covered floors and careful handling are how we keep it from ever being needed.
Can a storm door go in during the same visit?
Yes. Lots of homeowners pair the new entry door with one of our storm doors for more airflow and protection. Handling both together means a single day of setup and cleanup rather than two.

See your new front door options in person
At a free in-person consultation we size the opening, look closely at the frame and threshold, and talk through materials and finishes right at your door. You get a clear written quote, and installation day ends with a swept, tidy entry.